The cleaning and maintenance precautions of the faucet include the following three points:
1. Lightly open and lightly close
Don’t switch the faucet too hard, just turn it quietly. The metal hose of the shower head should be in a natural stretched state.
To fold into a dead corner, avoid breaking.
2. organize regularly
Even high-quality faucet products must rely on proper finishing and maintenance to perform their functions. The correct way is to use a neutral cleaning solution with a soft cloth.
Avoid using alcohol-containing and acidic cleaners when scrubbing and finishing, because they will damage the appearance of the faucet.
3. Develop good cleaning and maintenance habits
1. Since the water contains MSI carbonic acid, it is easy to form scale on the surface of the metal and cause corrosion to the appearance of the faucet, so you should always use soft cotton
Wipe the exterior of the faucet with a cloth or sponge with neutral soap and water, and then dry the exterior with a soft cloth. And clean the water outlet and equip the screen to clean the impurities and scale in the screen.
net.
2. After taking a shower, clean the water droplets in the shower, and then hang it up. Don’t put the shower directly on the switch to cause scale. If water accumulates
Use a pencil tip or chopsticks to quietly scrape off the dirt, and then wipe it clean with a rag.
3. For scale, rust, etc. on the faucet, just use a damp cloth or sponge dipped in a small amount of special detergent to scrub the surface, and then wipe it dry with a clean cloth or rinse with water
Just wash it clean. Dip a soft toothbrush with toothpaste or use a scouring pad with toothpaste to scrub quietly, which can remove limescale and oil stains and make the appearance of the faucet clean and bright.
4. Many people only notice the appearance of the faucet when cleaning the faucet, but the inside of the faucet is actually more important. If the faucet’s water output is reduced or the water is discharged
Fork, it may be caused by blockage of the bubbler. The aerator can be removed, after soaking in vinegar, clean the debris with a small brush or other tools, and then reinstall it
Pack.
Post time: Sep-10-2021