• solar shower

News

Some hard common sense recommended for buying a bath and shower!

Many people think that there is nothing to consider when taking a shower in the shower. It is OK to search for market sales online at will, or to let the company match the decoration materials in big cities. Many key points have indeed been ignored. In fact, my family did it before I was young, and I never thought there were so many things that must be paid attention to.
Come on, Xiao Youbian, you taste carefully. Avoid the purchase and installation of showers, found that it is not easy to use, inconvenient, or the actual effect of hand-held shower water is poor, or the adjustment part is unstable, or the plastic hose is cracked, or the temperature of the water must wait for a long time .
The key design scheme of the shower has many hydropower engineering problems:
The electric water heater is suitable for the 01 temperature-controlled shower.
Your electric water heater determines whether it can be integrated into a thermostatic faucet. Thermostatic faucets are mostly standard in Japanese homes, but their popularity is not high in China. If the solar electric water heater is used, it depends on whether the electric water heater has an intelligent temperature limit. The natural gas water heater should take into account the total flow size, and the electric water heater cannot be used. There is no temperature limit.
02 The height of the water inlet hole.
The height of the water inlet hole should be ergonomic. The adjustment range of the shower column is standard. If the water inlet hole preservation rate is low, either make do with the application, or just pay for the extension.
If the inlet hole is too high, after installing the toilet ceiling, the shower column cannot be installed immediately. The minimum height of the shower column is generally 90, and some shower columns cannot be adjusted in height, so you should pay attention.
03 The hot and cold orientation of the water inlet.
If you want to use a thermostatic faucet, the standard showers on the market are only suitable for the wall, the hot water on the left and the cold on the right. If the pre-embedding is reversed, it is not a temperature control, but a disordered temperature, the shower will be damaged immediately and only need to be replaced, or just do a little crossover of the external pipeline. Here is a larger pit, and it has been reminded that there are always customers jumping into the pit.
04 The length of the embedded parts of the water inlet pipe.
This is also a normative category. If the embedded time is short, the connector must be migrated. If the embedded part takes a long time, the decorative cover must be removed. Some showers with service platforms cannot be installed immediately.
Hope this helps you. Before buying a shower, you can prevent pits. There are basic ways to sell the market. One is the temperature of the water. When taking a bath, the family uses the tap to run out the water. Immediately you feel cold water coming. There is also an unscientific design product problem.
Therefore, I suggest that you buy a safe temperature-controlled shower now. One button to start the excellent temperature control, no need to wait or sewage when taking a shower. High cost performance, high value of appearance.


Post time: Apr-19-2022

Leave Your Message